Filter
Top Products
Music-on-hold
555-233-116
194 Issue 4 October 2002
Figure 47. Connections to nonregistered music-on-hold using analog line for an MCC1,
SCC1, CMC1, or G600 Media Gateway
NOTE:
A wiring block must be locally engineered.
For G700 Media Gateways
On a G700 Media Gateway, the music-on-hold feature is connected through a port
on an MM711 Analog Media Module.
The G700 Media Gateway does not support an auxiliary trunk circuit pack.
Therefore, for internal communications controller (ICC) G700 Media Gateway
users, the music-on-hold feature through an auxiliary trunk is not supported.
However, external communications controller (ECC) G700 Media Gateway users
can access the music-on-hold feature if their equipment is physically connected to
a TN763 auxiliary trunk circuit pack in an EPN carrier of an ECC system.
NOTE:
ICC refers to MultiVantage Software running on an S8300 Media Server
installed in, and acting as the primary controller for, a G700 Media Gateway.
ECC refers to MultiVantage Software running on an external S8700 Media
Server within a G700 Media Gateway environment.
1. Customer-supplied music source
2. 25-pair cable to analog line circuit pack
3. 909A/B universal coupler
4. Part of main distribution frame
5. Power supply for universal coupler
6. 103A or modular wall jack
7. 4-pair modular cord
8. Tip and ring wires
0051_0PDH 062696
J2
J3
J1
5
2
4
5
4
5