Filter
Top Products
IPC-1600 Diagnostics
Copy Diagnostics to the System Disk
Comment:
This procedure is only for systems running native
MS-DOS from the system disk drive.
Power up the system [AT&T Work Group System (WGS) computer] to
boot native MS-DOS (Version 3.0 or later) from the system disk drive.
Insert the “Intelligent Ports Card (IPC-1600) MS-DOS Device Drivers and
Diagnostics, Version 1.0“ diskette into the appropriate diskette drive and close
the diskette drive door.
Use the MS-DOS COPY command to copy the IPC16DIA.COM file from
the diskette to the system disk. It is recommended that you create a separate
directory for the IPC-1600 files as shown in the following examples. Note
that system prompts are machine dependent.
As shown in the following screen display, first shift from the “A” drive to
the “C” (system disk) drive and create a directory named IPC as follows.
A: $ C:
C: $ mkdir ipc
C: $
TROUBLESHOOTING THE INTELLIGENT PORTS CARD 7-3