Filter
Top Products
Guide Organization
This guide provides directions on how to install and set up the AT&T
Intelligent Ports Card, Model 1600 (IPC-1600). It also explains how the
product interacts with other components of your computer system and advises
you on troubleshooting.
The remainder of this guide is divided into the following:
■
■
■
■
■
■
Chapter 2, “MS-DOS* Device Driver Installation,” describes how to
install the MS-DOS device driver software.
Chapter 3, “UNIX
®
System Device Driver Installation,” describes how
to install the UNIX system device driver software.
Chapter 4, “Hardware Installation,” provides general information about
installing the IPC-1600 board. Refer to the documentation that came
with your system for information about installing and removing
expansion bus slot boards.
Chapter 5, “Managing the Serial Ports,” defines the IPC-1600 device
node names and describes how to administer (manage) the serial ports
using either the hipcutils(1) command or the optional AT&T Framed
Access Command Environment (FACE) subsystem under the UNIX
system.
Chapter 6, “System Features,” reviews the IPC-1600 system features.
Chapter 7, “Troubleshooting the Intelligent Ports Card,” describes how
to run diagnostic tests supplied on the “Intelligent Ports (IPC-1600)
MS-DOS Device Drivers and Diagnostics, Version 1.0” diskette.
Information on how to use the Intelligent Ports Card with other
products and other “Helpful Hints” are also provided in this chapter.
* Registered trademark of Microsoft Corporation
OVERVIEW 1-1