Filter
Top Products
Data Circuit-Terminating Equipment
(DCE) Connections
Overview
Adapters are separately orderable for connecting the 10-pin IPC-1600
serial I/O ports and the host system DB-25 integral port to serial printers, I/O
terminals, and modems configured as Data Circuit-terminating Equipment
(DCE).
AT&T ACU/MODEM (DCE) Adapters
The AT&T ACU/MODEM (DCE) Adapter is an RJ-45 (10) to DB-25 DCE
connector. Both male (COMCODE 846362754) and female
(COMCODE 846362762) RJ-45 (10) to DB-25 versions of this adapter are
available. Figure B-9 shows the connection diagram of the AT&T
ACU/MODEM (DCE) Adapter. This adapter is used to connect an IPC-1600
serial port to a terminal/printer or Automatic Calling Unit (ACU)/MODEM
configured as DCE.
AT&T Remote Console Adapter
The AT&T Remote Console Adapter (COMCODE 846362770) is an RJ-45
(10) to male DB-25 connector. The AT&T Remote Console Adapter provides
the signal connections necessary to stay in communication with the host
system when the host system reboots or resets. Figure B-10 shows the
connection diagram of the AT&T Remote Console Adapter. Note that a
10 pin to female DB-25 AT&T ACU/MODEM (DCE) Adapter is used at the
host system integral port to connect to the 10-conductor modular cable. The
AT&T Remote Console Adapter connects the modular cable to an
ACU/MODEM. The AT&T Remote Console Adapter can also be used with a
10-conductor modular cable to connect an IPC-1600 serial port to an
ACU/MODEM or other DCE having a need for the special features of this
adapter.
B-16 IPC-1600 USER’S GUIDE