Filter
Top Products
Index
H
Hardware Installation,
Connect the 16-Ports Fanout Module Cables, 4-4
Connect the Ribbon Cables to the IPC-1600, 4-5
Install the Board,
4-6
Introduction,
4-1
Preparation,
4-2
Hardware Parameter Settings,
DS1 Switch Settings—Controller Memory Starting Address, A-3
DS1 Switch Settings—I/O Port Address, A-8
DS2 Switch Settings—Interrupt Request Level, A-10
Local Program Memory Size Select Jumper J1, A-12
Sample Configuration Record,
A-13
Switch, Jumper, Connector Location Information,
A-1
Headers,
P3 and P4,
B-3
Helpful Hints,
7-10
Hexadecimal Notation,
1-8
I
Install the Board,
4-6
Installation Information,
Choosing a Mounting Location,
C-3
Connecting Port Modular Cables,
C-4
General Instructions,
C-2
Installing the 16-Ports Fanout Module, C-4
Routing and Connecting Ribbon Cables to the Fanout Module, C-3
Securing the Wire-Frame Assembly,
C-3
Installation Procedure,
Create or Modify the C O N F I G . S Y S File, 2-6
Execute IPC16CNF to Configure the Driver, 2-7
Install the Hardware,
2-4
Load the Software,
2-4
Preconfigure the IPC-1600 Boards, 2-3
Reboot the System,
2-14
INDEX IN-3