Filter
Top Products
Installation Procedure
Create or Modify the CONFIG.SYS File
Use an editor, such as EDLIN, to change (or create) the CONFIG.SYS file
in the root directory of the drive from which you boot MS-DOS.
Add the following line to the CONFIG.SYS file if the IPC16DOS.SYS file is
in a separate directory. The complete path name must be specified for the
DEVICE entry. For example, if the driver is in the a directory path \IPC, the
CONFIG.SYS
file entry is as follows.
DEVICE=\IPC\IPC16DOS.SYS
Add the following line to the CONFIG.SYS file if the IPC-1600 driver
(IPC16DOS.SYS
file) is in the root directory.
DEVICE=IPC16DOS.SYS
2-6 IPC-1600 USER’S GUIDE