Filter
Top Products
Installation Procedure
After selecting a channel, the following options are available.
Q)uit E)nable B)aud M)ode H)andshake N)ame C)hange Chanl #
Select Parameter:
The E)nable option is used to enable (ENBL) or disable (DSBL) the
selected channel (port) as shown in the following screen display.
Select Settings:
The B)aud option is used to set the BAUD rate for the selected channel
A) DSBL
B) ENBL
(port) as shown in the following screen display.
A) 50 B) 75 C) 110 D)134.5 E) 150 F) 200
G) 300 H) 600 I) 1200 J) 1800 K) 2000 L) 2400
M) 3600 N) 4800 O) 7200 P) 9600 Q)19200 R)38400
Select Baud Rate:
The M)ode option is used to set the parity, word size, and number of stop
bits, respectively. Parity can be none (N), odd (O), or even (E). The word
size can be 5, 6, 7, or 8 bits. The number of stop bits is 1 or 2. The following
screen display shows how these options are selected.
A) N,5,1 B) N,6,1 C) N,7,1 D) N,8,1 E) N,5,2 F) N,6,2
G) N,7,2 H) N,8,2 I) O,5,1 J) O,6,1 K) O,7,1 L) O,8,1
M) O,5,2 N) O,6,2 O) O,7,2 P) O,8,2 Q) E,5,1 R) E,6,1
S) E,7,1 T) E,8,1 U) E,5,2 V) E,6,2 W) E,7,2 X) E,8,2
Select Mode:
MS-DOS DEVICE DRIVER INSTALLATION 2-11