Filter
Top Products
Installation Procedures
Comment 1:
Comment 2:
The installation software displays are dynamic and
depend on the type and configuration of the
machine. All possibilities are not presented in the
examples.
AT&T Framed Access Command Environment
(FACE) subsystem is an optionally orderable
product. If available, the AT&T FACE software
should be installed before installing the IPC-1600
software.
Specify the Type of Installation
At the start of the installation process, you may be asked to specify what
is to be installed. The following screen shows the installation options with
AT&T FACE subsystem already installed.
Please select the type of installation from the list below:
1. Install device driver only.
2. Install device driver and FACE administration menus.
3. Quit
Type:
UNIX SYSTEM DEVICE DRIVER INSTALLATION 3-5