Filter
Top Products
Index
P
Performance Characteristics,
6-3
Ports and Drivers,
1-6
Power Consumption,
6-5
Preparation,
Prepare Machine for Installation,
4-2
Prepare the IPC-1600 for Installation, 4-3
Prepare the IPC-1600 for Installation,
Set the Controller Memory Starting Address,
4-3
Set the Input/Output Port Address, 4-3
Set the Interrupt Request Level,
4-3
R
Removing the MS-DOS Device Driver and Diagnostics, 2-16
RF Interference Warning,
P-3
RJ-45 Type Modular Jack Connector, B-9
S
Serial Input/Output Device Interface,
10-Conductor Modular Cables,
B-19
16-Ports Fanout Module Assembly,
B-7
Adapter and Cable Ordering Information,
B-26
Adapter Use Information,
B-27
AT&T 10-Pin Extender Adapter,
B-21
Compatibility with Other I/O System Cabling,
B-22
Data Circuit-Terminating Equipment (DCE) Connections,
B-16
Data Terminal Equipment (DTE) Connections,
B-10
IPC-1600 80-Pin Headers P3 and P4, B-3
RJ-45 Type Modular Jack Connector, B-9
Serial Port Characteristics,
B-1
Voltage Envelope,
B-2
Serial Port Characteristics,
B-1
space condition,
B-2
Switch Settings,
IN-6 IPC-1600 USER’S GUIDE