Filter
Top Products
Index
Installation Procedure (Continued)
Reconfigure the Boards If Necessary,
2-14
Installation Procedures,
Assigning an I/O Address,
3-12
Assigning Board-Unique Hardware Interrupt Request Level,
3-11
Assigning Board-Unique Starting Controller Memory Address,
3-13
Completing Driver Installation,
3-17
Confirming the Data,
3-15
Specify Shared or Board-Unique Controller Memory Assignment, 3-8
Specify Shared or Board-Unique Hardware Interrupt Assignment,
3-7
Specify the Number of Boards,
3-10
Specify the Type of Installation, 3-5
IPC-1600 Administration Via hipcutils,
5-6
IPC-1600 Architecture,
1-5
IPC-1600 Diagnostics,
Copy Diagnostics to the System Disk, 7-3
How to Run Diagnostics,
7-5
IPC-1600 Test Descriptions, 7-8
IPC-1600 Test Descriptions,
Host 64KB Dual-Ported Memory Tests,
7-8
Host/IPC-1600 Interface Tests, 7-8
IPC-1600 16K Local Memory Tests, 7-8
IPC-1600 64K Dual-Ported Memory Tests, 7-8
IPC-1600 Communication Ports Tests, 7-9
IPC-1600 FEPOS Integrity Tests, 7-8
J
Jumper J1,
A-12
L
Limitations of the IPC-1600 MS-DOS Device Driver, 2-18
Local Program Memory Size Select Jumper J1, A-12
Location Information,
Switch, Jumper, and Connector,
A-1
IN-4 IPC-1600 USER’S GUIDE