Filter
Top Products
Introduction
This chapter includes detailed information on troubleshooting the
Intelligent Ports Card and the use of the diagnostic program supplied on the
“Intelligent Ports Card (IPC-1600) MS-DOS Device Drivers and Diagnostics,
Version 1.0” diskette. Information on how to use the IPC-1600 with other
products and other “Helpful Hints” are also provided in this chapter.
Note:
Systems running the UNIX operating system must either
create a native MS-DOS partition on the system disk and
make it the active partition or boot native MS-DOS from a
diskette drive to run the IPC-1600 diagnostics. The
IPC16DIA.COM file on the diskette is copied to the system
disk drive to run the diagnostics from the system disk drive.
When MS-DOS is booted from diskette, the IPC-1600
diagnostics are run from IPC-1600 MS-DOS diskette. Refer to
the MS-DOS documentation for information on creating a
MS-DOS partition and copying files.
TROUBLESHOOTING THE INTELLIGENT PORTS CARD 7-1