Filter
Top Products
Definition of IPC-1600 Device Node Names
Hardware Device Class
The ttyih
xyy provides the standard EIA RS-232C hardware handshaking
and monitors the following:
■
■
■
Data Carrier Detect (DCD)
Clear To Send (CTS)
Ring Indicator (RI).
The detection of the DCD loss causes the port to log off if the Hang UP
on final CLose (HUPCL) flag is set. In addition, the presence of the CTS
signal enables the IPC-1600 transmitter and the presence of the DCD signal
enables the IPC-1600 receiver.
The /dev/ttyih
xyy device type directs the IPC-1600 to:
■
■
Turn ON the RS-232C control signals, such as Data Terminal Ready
(DTR) and Request To Send (RTS)
Monitor these input status signals:
— Clear To Send (CTS)
— Data Carrier Detect (DCD)
— Ring Indication (RI).
The /dev/ttyih
xyy device type must be used with I/O devices (terminals,
printers, MODEMs, etc.) when RS-232C hardware handshake signals are
desired (RTS and CTS).
MANAGING THE SERIAL PORTS 5-5