Filter
Top Products
The Global Directory 47
For example, Boston (R1) has two branch offices (R1B1 and R1B2)
Chicago (R2) has two branch offices (R2B1 and R2B2). Database
replication is enabled between R1 and R2.
■ The global directory on R1 includes users provisioned on R1, R1B1,
R1B2, and R2.
■ The global directory on R2 includes users provisioned on R2, R2B1,
R2B2, and R1.
Notice that the branch offices associated with the remote region are not
included. For example, while the global directory for R1 does include
users provisioned on R2, it does not include users provisioned on R2’s
branches, R2B1 and R2B2.
Adding Remote Branches to a Regional Global Directory
To add remote branch users (in this example, R2B1 and R2B2) to the
global directory for a local region (in this example, R1):
1 Log on to the primary VCX server in R1 using the cworks account and
enter these commands:
cd /opt/3com/VCX/vcxdata/globaldir/bin
./config.sh
2 At the prompt, enter 101.
The Enter the Primary ROSCA IP Address or Hostname prompt appears.
3 Enter the hostname or IP address of the primary server at the remote
regional office (in this example, R2) whose user directory you want add.
The Enter the Secondary ROSCA IP Address or Hostname prompt
appears.
4 Enter the hostname or IP address of the primary server at the local
regional office (in this example, R1).
The Enter an Username for both Primary & Secondary ROCSA’s prompt
appears.
5 Enter the username for the cworks account. The default is cworks but
may be changed during installation.
The Enter Password prompt appears.
6 Enter the password for the cworks account after the asterisks (*). The
default is cworks but may be changed during installation.
7 Press Enter.