Filter
Top Products
Configuring Patterns (USERS) 261
You can use the VCX Administrator application to manage patterns on
either the USERS interface or the DIRECTORY interface. This section
describes how to configure patterns through the USERS interface (see
C
onfiguring Patterns (DIRECTORY)). A pattern configured through the
USERS interface also appears on the DIRECTORY interface.
Adding Patterns To add a pattern:
1 From the Central Manager, select the VCX server on which you want to
add a pattern (see A
ccessing a VCX Site through the Central Manager).
The USERS interface is enabled and the Users page appears. This page
lists all the users configured on this server. The menu options for the
USERS interface appear on the left side of the window.
2 Click Patterns.
The Patterns page appears. See Figure 98
.
CAUTION: Most of the patterns shown in Figure 98
are provided by VCX
software, including patterns for the emergency numbers 911 and 9911.
If your country does not use 911 emergency dialing, you must ensure
that a dial pattern and dial plan exist for your emergency number, and
that the dial plan is included in the phone profile assigned to your users’
extensions. See Configuring Emergency Services
for more information.