Filter
Top Products
304 CHAPTER 10: CONFIGURING ROUTING AND TRANSLATION SERVICES
2 In the Actions column for the route, click End Points.
The Route - Assigned End Points page appears. See Figure 111
.
3 In the Action column, click OutDial Patterns for the appropriate end
point.
The Route - End Point - Assigned OutDial Patterns page appears showing
any OutDial patterns currently associated with the end point assigned to
the route. See Figure 115
.
4 You can unassign one OutDial pattern or multiple OutDial patterns.
■ To unassign one OutDial pattern, click Unassign in the Action column
for the OutDial pattern you want to unassign from the end point.
■ To unassign multiple OutDial patterns, enter a check mark in the check
box preceding each OutDial pattern you want to unassign, then click
Unassign Selected.
A confirmation window appears prompting you to verify the unassign
action.
5 Click OK.
The Route - End Point - Assigned OutDial Patterns page refreshes.
Managing Route
Plans
This section describes how to add and delete route plans. A route plan
associates a pattern with a route (which includes one or more end
points). A route plan can also specify a routing policy and source-based
routing input parameters.
Note that you can also add a route plan by running the Route Plan
Wizard. See Using the Route Plan Wizard
.
Source-based input parameters are used for the following two routing
functions:
■ Destination number to route mapping associates the destination
number to a specific route. This option is described in Adding a Route
Plan.
■ Destination number translation translates the number, which can be a
string or an E.164 phone number, into another number. This
translation can be a complete replacement of the number or a partial
replacement. This option is described in Configuring Number
Translation Patterns (DIRECTORY).