Filter
Top Products
Chapter 5 Broadband
FMG3024-D10A / FMG3025-D10A Series User’s Guide
73
Figure 16 Broadband Add/Edit: Routing - PPPoE - IPv6 IPv4 Dual Stack
Figure 17 Broadband Add/Edit: Routing - PPPoE - IPv6 Only
The following table describes the fields in this screen.
Table 6 Broadband Add/Edit: Routing - PPPoE
LABEL DESCRIPTION
General
Name Enter a service name of the connection.
Mode Select Routing (default) from the drop-down list box if your ISP give you one
IP address only and you want multiple computers to share an Internet account.
WAN Service Type This field is available only when you select Routing in the Mode field. Select
the method of encapsulation used by your ISP.
• PPP over Ethernet (PPPoE) - PPPoE (Point to Point Protocol over
Ethernet) provides access control and billing functionality in a manner
similar to dial-up services using PPP. Select this if you have a username and
password for Internet access.
• IP over Ethernet - In this type of Internet connection, IP packets are
routed between the Ethernet interface and the WAN interface and then
formatted so that they can be understood in a bridged environment.