Filter
Top Products
FMG3024-D10A / FMG3025-D10A Series User’s Guide 153
CHAPTER 14
MAC Filter
14.1 Overview
This chapter discusses MAC address filtering.
You can configure the Device to permit access to clients based on their MAC addresses in the MAC
Filter screen.
14.1.1 What You Need to Know
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is
assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02. You need to know the MAC address of the devices to configure this screen.
14.2 The MAC Filter Screen
Use the MAC Filter screen to allow LAN clients access to the Device. To change your Device’s MAC
filter settings, click Security > MAC Filter. The screen appears as shown.
Figure 75 Security > MAC Filter