ZyXEL Communications FMG3025-D10A IP Phone User Manual


 
Chapter 13 Firewall
FMG3024-D10A / FMG3025-D10A Series User’s Guide
151
13.5 The DoS Screen
Click Security > Firewall > DoS to display the following screen. Use this screen to enable or
disable Denial of Service (DoS) protection.
Figure 74 Security > Firewall > DoS
Each field is described in the following table.
13.6 Firewall Technical Reference
This section provides some technical background information about the topics covered in this
chapter.
13.6.1 Guidelines For Enhancing Security With Your Firewall
1 Change the default password via web configurator.
2 Think about access control before you connect to the network in any way.
3 Limit who can access your Device.
4 Don't enable any local service (such as Telnet or FTP) that you don't use. Any enabled service could
present a potential security risk. A determined hacker might be able to find creative ways to misuse
the enabled services to access the firewall or the network.
5 For local services that are enabled, protect against misuse. Protect by configuring the services to
communicate only with specific peers, and protect by configuring rules to block packets for the
services at specific interfaces.
6 Keep the firewall in a secured (locked) room.
Table 42 Security > Firewall > DoS
LABEL DESCRIPTION
DoS Protection
Blocking
DoS (Denial of Service) attacks can flood your Internet connection with invalid packets
and connection requests, using so much bandwidth and so many resources that Internet
access becomes unavailable.
Select Enable to enable protection against DoS attacks or Disable to disable it.
Apply Click Apply to save the DoS Protection settings.
Cancel Click Cancel to restore your previously saved settings.