Filter
Top Products
FMG3024-D10A / FMG3025-D10A Series User’s Guide 25
CHAPTER 3
Tutorials
3.1 Overview
This chapter contains the following tutorials:
• Setting Up Your WAN Connection
• Setting Up NAT Port Forwarding
• How to Make a VoIP Call
• Using the File Sharing Feature
• Using the Media Server Feature
• Using the Print Server Feature
• Configuring Static Route for Routing to Another Network
• Configuring QoS Queue and Class Setup
• Access the Device Using DDNS
3.2 Setting Up Your WAN Connection
This tutorial shows you how to set up your Internet connection using the web configurator.
Use the information from your Internet Service Provider (ISP) to configure the Device. Do the
following steps:
1 Connect the Device properly. Refer to the Quick Start Guide for details on the Device’s hardware
connection.
2 Connect one end of a fiber cable to the fiber port for data traffic on your Device.
3 Connect one end of Ethernet cable to an Ethernet port on the Device and the other end to a
computer that you will use to access the web configurator.
4 Connect the Device to a power source, turn it on and wait for the POWER LED to become a steady
green. Turn on the modem provided by your ISP as well as the computer.
Account Configuration
1 Click Network Setting > Broadband to open the Broadband screen. Click Add new WAN
Interface.