Filter
Top Products
Commander Installation Guide
Issue 9 Trilogy Communications Limited Page 41 of 81
5.5.4 500-3X-5X SERIES DIP SWITCH SETTINGS
Within the panel a series of DIP switches determine the correct panel type. These are
factory set and are included for reference in Appendix 1.
A further set of DIP switches are user accessible at the rear of the panel and control the
action of the front panel CUT switch. The factory default is shown in the table below. Switch
position 4 is not used.
Cut Switch Action DIP 1 DIP 2 DIP 3
No action OFF OFF OFF
Changeover to HSet MIC (default) ON OFF OFF
LS cut OFF ON OFF
Changeover to HSet MIC and LS cut ON ON OFF
MIC cut OFF OFF ON
Changeover to HSet MIC and MIC cut ON OFF ON
LS cut and MIC cut OFF ON ON
Everything ON ON ON