Sharp IQ-8920 PDAs & Smartphones User Manual


 
Terminal Mode
Hardware
requirements
The
Terminal
mode lets you use the telecommunications
functions of the unit to link to a “remote” computer or
system (one that is physically distant), including a
computer bulletin board service (BBS) or an on-line
information service such as CompuServe, and to transfer
data via phone lines between the unit and a personal
computer. The
Terminal
mode makes it possible, for
example, to link your unit with your computer at home or
at the office using ordinary telephone lines, or to
download (receive) information from public or private
subscription databases.
The
Terminal
mode is accessed through the
PERIPHERALS
menu. Once selected, it functions as any
other application, with its own menu for carrying out
commands and configuring the unit for
telecommunications.
To transfer data in the
Terminal
mode, you will need the
optional SHARP CE-FM1 FAX/MODEM and CE-137T
LEVEL CONVERTER. If you already have a
Hayes-compatible modem, you will need a SHARP
CE-130T or CE-131T cable, -and a straight, male-to-male
RS-232C cable to connect the modem to the unit.
If you use the CE-131T cable, you will also need a null
modem adapter. For an explanation of how to configure
the null modem adapter, see the table below.
Null modem pin configuration
1
-
1
2
-
3
3
-
2
4
-
5
5
-
4
6, 8
-
20
7
-
7
20
-
6,8
253