Filter
Top Products
-t
For a full explanation of using the unit with a RAM card,
see
p.
238.
Printing from the unit
You have great flexibility in what you can print out from
the unit-from what is currently on the display to single
entries to all of the entries in an application. The range of
printing options depends on the particular application you
are printing from.
Entries and information can be printed on any standard
parallel PC printer connected to the unit via the optional
CE-IRI
wireless interface. The unit has built-in printer
drivers (a printer driver is software that instructs the
printer how to format and print data) for the following
printers:
l
Canon
BJ-IOe
Series
l
Epson FX-80, FX-850 and LQ Series
l
Hewlett Packard LaserJet
II
and
III
Series
l
IBM Proprinter Series
The unit also works with printers that have an emulation
mode for any of the above printers (consult your printer’s
manual regarding the emulation modes it supports). For
information about other specific models supported by the
unit, consult your local SHARP dealer.
l
Data may not be printed exactly the same as originally
set in the unit if the printer being used does not support
the settings which were made (italics set in the
Notebook
application, etc.).
The following restrictions also apply:
LaserJet Series:
Text set for ELITE or PS in a
Notebook
entry may
not be printed properly using this model. (In the
LaserJet
III,
ELITE is available). In this case, select
PICA. No optional font from either printer can be used.
Proprinter Series:
The unit supports the Proprinter
X24E.
Printers that
emulate other Proprinter models may not function
222