Sharp IQ-8920 PDAs & Smartphones User Manual


 
Enhancing Capabilities Using a RAM Card
A RAM card can be used with your unit in any of three
ways:
0
to expand memory capacity,
l
as a means of sharing data with other
8900/9000
Series units, or of making use of data from
7000
or
8000 Series Organizers,
*
to backup the unit’s data.
Before installing the RAM card, you must set the
Secret
function in your unit to match the
Secret
function setting
in the RAM card. If the RAM card has never been used
before and you will be initializing it, or if it has already
been initialized but has never been used with a
password, you must delete any password from your unit
before installing the card. If the RAM card has been used
with a password-whether in your unit or another-the
password in the card and your unit must match.
+
For a full explanation of the
Secret
function and using
passwords, see p. 282.
-t
For a full explanation of how to install a RAM card, see p.
221.
IGZ
If you install a RAM card that has been used in a model
other than the
8900/9000
Series in this unit and then turn
the power on, a message will appear indicating that the
format of the card is different from that of the unit.
To use such a RAM card in this unit, all data in the card
must be erased and the card must be initialized. Perform
the following operations,
-t
You can also use RAM card data created on other
models in this unit. See p. 241.
1. With the card installed in the unit, turn the unit on. Touch
[ml
when the card format message appears.
2. Press the RESET switch while pressing
(ONj,
A message will appear asking if you want to clear the
238