Filter
Top Products
88
Clearing Settings
Base Unit
Handset
Function Factory preset
Direct HS. Access ON
Call monitoring ON
Message menu ON
Recording mode High quality
Auto message delete
OFF
Pager number Clear
Pager on/off OFF
Pager display No. Clear
PIN for registration Clear
Auto Attendant System
OFF
Answering System OFF
Line 1 to 4 greetings
Pre-recorded greeting
Number of rings Toll Saver
Handset answer mode
OFF
Function Factory preset
Base unit ringer volume
HIGH
Base unit ringer pattern
Pattern 1
Group ring
All handsets ring
Base unit Incoming OFF
call tone
Dialing mode Tone
Flash time 700 ms
Call restriction OFF
Base unit line selection
AUTO
Line mode A mode
General delivery 0000
mailbox password
Personal mailbox 1111–8888
password (see page 56)
With the base unit
The following settings of the base unit and the registered cordless
handsets will return to the factory preset.
1
Press (FUNCTION).
2
Press or until the arrow
points to “Initialization”,
and press H.
3
While “Function” is at the
arrow, press H.
Function Factory preset
Ringer volume HIGH
Ringer pattern Pattern 1
Incoming call tone ON
Line selection AUTO
Auto talk ON
Make sure that the base unit is in the standby mode.
4
Press (CLEAR).
• A beep sounds and “Clear” is
displayed.
• To return to the standby mode,
press (EXIT).
With the cordless handset
The following settings of the
cordless handset will return to the
factory preset.
1
Press (FUNCTION).
2
Press or until the arrow
points to “Initialization”,
and press H.
3
While “Function” is at the
arrow, press H.
4
Press (CLEAR).
• A beep sounds and “Clear” is
displayed.
• To return to the standby mode,
press (EXIT).
Make sure that the cordless
handset is in the standby mode.