Filter
Top Products
68
For Caller ID service users (p. 38)
During playback, the display shows the
name and/or number of the caller whose
message is being played.
To call back the displayed number:
During playback, lift the handset or press (DIGITAL!SP-PHONE).
• You can press a line button instead of pressing (DIGITAL!SP-PHONE).
• The unit stops playback and automatically dials the displayed phone number.
JACK SMITH
1-234-567-8901
---Message 3---
During playback
To repeat a
message
To skip a message
To stop operation
Press (1) or I. (If you press within 5 seconds of
playback, the previous message will be played.)
Press (2) or H. (The next message is played.)
Press (STOP).
• To resume playback, press (STOP).
• If you do not press any button for 60 seconds, the
unit will return to the standby mode.
To adjust the speaker volume (8 levels):
Press or during playback.
• Each time you press or , the volume
level will change.
Flash Memory Message Backup
Messages are stored indefinitely on a “flash memory” IC chip and will
not be affected by power failures. All messages are saved until you
erase them.
Ex. Level 8
Loud
Low
❚❚❚❚❚❚❚❚
High
Command Menu:
If you do not press in step 3 on page 67, after listening to new
messages or all messages, the Command Menu will be announced and
displayed:
“To play all messages, press 1.
To deliver a message, press 2. (p. 73)”
1=Play all msg.
2=Deliver msg.
=End
Listening to Messages with the Base Unit