Filter
Top Products
58
Select greeting
:Prerecord
∨∧
H
=Set
Setting the Automated Attendant System
The Automated Attendant System can be set to any line. You can record
up to 5 greeting messages of up to 2 minutes each. The same greeting
message can be used on more than one line. The same messages can be
used for the Answering System (p. 64).
Base Unit
1
Press the line’s (ANSWER!ON) button.
• The ANSWER ON indicator lights.
• The current setting is displayed.
2
Press H within 10 seconds.
3
Select “Auto attendant” by
pressing or , and press H.
4
To select “Prerecord”, press H.
• The pre-recorded message is played.
• The relevant line’s auto attendant icon
will be displayed.
Auto answering
Prerecord greet.
-L1-
H
=Change
Auto attendant
H
Auto answering
∨∧
H
=Set
Line1
Auto attendant
Prerecord greet.
We recommend you record brief greeting messages (see sample on
next page) in order to leave more time for recording new messages.
If you do not record a greeting message, the following pre-recorded
greeting message will be used:
“Hello, this is Automated Attendant System. Please enter your party’s extension,
followed by #. If you are using a rotary telephone, stay on the line.”
Make sure that the base unit is in the standby mode.
To turn on the Automated Attendant System and select
the pre-recorded greeting message
If the line’s ANSWER ON indicator lights, press the (ANSWER!ON) button to
turn it off.
12:00AM JAN. 1
Automated Attendant System