Filter
Top Products
46
Other Programmable Settings
Setting the Auto Talk Feature
The Auto Talk feature allows you to answer a call by lifting the cordless
handset off the charger without pressing (TALK). To view caller’s
information on the display after lifting the handset, turn this feature OFF.
Your phone comes from the factory set to ON.
Make sure that the cordless handset is in the standby mode.
Handset
4
Select “Off” or “On by pressing
or .
5
Press (ENTER).
• A beep sounds.
• To return to the standby mode,
press (EXIT).
• To answer a call when the Auto Talk
feature is OFF, lift the handset off the
charger, and press (TALK) or the
relevant line button.
1
Press (FUNCTION).
2
Press or until the arrow
points to “Talk switching”,
and press H.
3
Press or until the arrow
points to “Auto talk”, and
press H.
• The current setting is displayed.
Auto talk
:On
∨∧
ENTER=Save
Selecting the Ringer Pattern
You can select the desired ringer patterns of the base unit and cordless
handsets. 4 patterns are available for each line. Your phone comes from
the factory set to pattern 1. Programming must be carried out
separately for the base unit and cordless handset(s).
Make sure that the base unit/cordless handset is in the standby mode.
Base Unit
Handset
4
Enter the desired pattern using
the dialing buttons ((1) to (4)) for
each line. To move to another
line, press H or I.
• Each time you select a pattern, it
rings.
5
Press (ENTER).
• A beep sounds.
• To return to the standby mode,
press (EXIT).
1
Press (FUNCTION).
2
Press or until the arrow
points to “Ringer setting”,
and press H.
3
Press or until the arrow
points to “Ringer pattern”,
and press H.
• The current settings are displayed.
Ringer pattern
L1 L2 L3 L4
1 1 1 1