Filter
Top Products
47
Chapter 3 Advanced Operation
Calling Line Selection
The base unit and cordless handsets will automatically select a free line
when you make a call. You can change the calling line selection of the
base unit and handsets.
Programming must be carried out separately for the base unit and
cordless handset(s).
Make sure that the base unit/cordless handset is in the standby mode.
Base Unit
Handset
5
Press (ENTER).
• A beep sounds.
• To return to the standby mode,
press (EXIT).
1
Press (FUNCTION).
2
If using the base unit:
Press or until the arrow
points to “Line setting”, and
press H.
OR
If using the cordless handset:
Press or until the arrow
points to “Talk switching”,
and press H.
3
While “Line selection” is at
the arrow, press H.
• The current setting is displayed.
Auto:
A free line will be selected (LINE 1
has priority) when making a call
(factory preset).
Line1: Line 1 will be selected when
making a call.
Line2: Line 2 will be selected when
making a call.
Line3: Line 3 will be selected when
making a call.
Line4: Line 4 will be selected when
making a call.
4
Select the desired line selection
by pressing or .
Line selection
:Auto
∨∧
ENTER=Save
• Any line can be selected manually,
regardless of the programmed line
selection, by pressing that line button.