Filter
Top Products
66
Answering System
To select/change the recorded message
If the line’s ANSWER ON indicator lights, press the (ANSWER!ON) button to
turn it off.
1. Press
the line’s
(ANSWER!ON) button, and press H within 10 seconds.
2. While “Auto answering” is at the arrow, press H.
3. Select the number of rings, “2” to “7” or “Toll saver”* (p. 64), by
pressing or , and press H.
• You can go back to the previous display by pressing
I
.
4. Select “Greeting1” through
“Greeting5” by pressing or ,
and press H.
5. To select the message, press (2).
OR
To change the message:
Press (1). Press H to start recording.
After the tone, talk into the MIC.
To end, press H. Press (2) to select the message.
• If you use the message for another line, it will also be changed.
To turn off the Answering System
Press the line’s (ANSWER!ON) button.
• The ANSWER ON indicator light goes out.
Greeting3 check
:00
1=Change 2=OK