Filter
Top Products
51
Chapter 3 Advanced Operation
1
Press (FUNCTION).
2
Press or until the arrow
points to “Registration”, and
press H.
3
While “Set PIN” is at the arrow,
press H.
4
Enter a 4-digit PIN, and press
(ENTER).
• If you enter a wrong number, press
(CLEAR), and enter the PIN again.
5
Enter the PIN again, and press
(ENTER).
• A beep sounds.
• To return to the standby mode,
press
(EXIT).
Enter new PIN
:----
ENTER=Set
Setting the PIN
A 4-digit PIN (Personal Identification Number) prevents unauthorized
persons from registering a cordless handset at the base unit and using it.
Once the PIN is set, the PIN is required for registration of the cordless
handsets (p. 52).
Make sure that the base unit is in the standby mode.
Base Unit
Enter new PIN
again :----
ENTER=Save
To change the PIN
1
Press (FUNCTION). Press or
until the arrow points
to “Registration”, and press
H.
2
While “Set PIN” is at the arrow,
press H.
3
Enter the current PIN, and press
(ENTER).
4
Enter a new 4-digit PIN, and
press (ENTER).
5
Enter the new PIN again, and
press (ENTER).
• A beep sounds.
• To return to the standby mode,
press (EXIT).
Enter old PIN
:----
ENTER=Set
Enter new PIN
:----
ENTER=Set
Enter new PIN
again :----
ENTER=Save
Once you have set a PIN, you cannot
confirm it. We recommend you write
down the PIN. If you forget the PIN,
consult your nearest Panasonic
Service Center.
To erase the PIN, repeat steps 1 to
3 and press (ENTER) twice.