Filter
Top Products
50
Other Programmable Functions
Incoming Call Tone
While using one line, you can be informed if another call arrives on the
other line by two tones. During an intercom call or while listening to
messages (p. 67, 70), you can also be informed by two tones if a call
arrives. If you set to ON, this incoming call tone will be heard for as long as
the other line rings. To delete this incoming call tone, set to OFF. To set
the incoming call tone to sound twice, set to “2”. Your base unit comes
from the factory set to OFF. Your cordless handset comes from the factory
set to ON.
Programming must be carried out separately for the base unit and
cordless handset(s).
Make sure that the base unit/cordless handset is in the standby mode.
Base Unit
Handset
5
Press (ENTER).
• A beep sounds.
• To return to the standby mode,
press (EXIT).
1
Press (FUNCTION).
2
Press or until the arrow
points to “Ringer setting”,
and press H.
3
Press or until the arrow
points to “Incoming call”,
and press H.
• The current setting is displayed.
4
Select the desired setting, “2”,
“On” or “Off”, by pressing or
.
Incoming call
tone:2
∨∧
ENTER=Save