Filter
Top Products
31
Chapter 2
Basic Operation
With the cordless handset
1
Press (INTERCOM).
2
To page the base unit, enter (0)
.
To page another handset, enter the
extension number ((1) to (8)).
• The base unit or the paged handset rings.
• To stop paging, press
(INTERCOM).
• After the paged party answers, the display will
show the length of the call.
3
To end the intercom, press (TALK) or place
the handset on the charger.
Press extension
No. to call
Call[1]
←
[0]
Answering Intercom Calls
With the base unit:
After the rings, lift the handset or
press (DIGITAL!SP-PHONE).
To end the intercom, replace the
handset or press (DIGITAL!SP-PHONE).
With the cordless handset:
After the rings, press (TALK) or lift the
handset off the charger.
To end the intercom, press (TALK) or
place the handset on the charger.
During an intercom call:
• If an incoming call is being received, the line indicator on the base unit will
flash quickly or the handset user will hear two tones (incoming call tone p. 50).
To answer, press the relevant line button.
• If the unit detects a problem, an error message will be displayed (p. 93).
Calling[1]
→
[0]
Intercom
00-00-00
Ex. Handset 1 paging Base Unit
Ex. Base Unit paging Handset 1
Call[0]
←
[2]
Ex. Handset 2 paging
Off
00-07-15
• When the base unit and handset ringer volumes are set to OFF, they will not ring
(p. 21).