Filter
Top Products
74
Recording Mode
Messages are recorded in a “High quality sound mode”. To lengthen the
available recording time, the base unit user can select “Long recording
mode” which doubles the total recording time to 100 minutes. Your phone
comes from the factory set to “High quality sound mode”.
Make sure that the base unit is in the standby mode.
Base Unit
1
Press (FUNCTION).
2
Press or until the arrow
points to “Voice mail”, and
press H.
3
Press or until the arrow
points to “Recording mode”,
and press H.
• The current setting is displayed.
4
Select “Long recording
mode” or “High quality
sound” by pressing or .
5
Press (ENTER).
• A beep sounds.
• To return to the standby mode,
press (EXIT).
• “LR” (Long recording mode) will be
displayed if selected.
Long recording
mode 100min
∨∧
ENTER=Save
High quality
sound 50min
∨∧
ENTER=Save
3. Select “Off” or “On” by pressing
or .
4. Press (ENTER).
• A beep sounds.
• To return to the standby mode,
press (EXIT).
Call Monitoring Feature
While a caller is recording a message in the general delivery mailbox, you
can monitor the call through the speaker of the base unit. If more than one
line is receiving a call at the same time, only the first one can be
monitored. You can answer the call by lifting the base unit handset,
pressing (DIGITAL!SP-PHONE) or the relevant line button.
If the call monitoring feature is not required, turn it OFF by pressing
(STOP). Each time you press (STOP) in the standby mode, the feature will
turn ON or OFF. While monitoring a call, the feature will temporarily turn
OFF, and will return to ON after the call is disconnected. Your phone
comes from the factory set to ON.
You can also turn the feature ON or OFF using the function menu.
Make sure that the base unit is in the standby mode.
Base Unit
1. Press (FUNCTION), and press
or until the arrow points to
“Voice mail”, and press H.
2. Press or until the arrow
points to “Call monitoring”,
and press H.
Other Voice Mail System Features