Filter
Top Products
2.4 Installation of Optional Cards and Unit
80 General Installation
Note
• For details about the jack for Power Failure Transfer, refer to Section
2.5.1 Auxiliary Connection for Power Failure Transfer.
• For cable pin numbers to be connected, see "Pin Number Chart" in Section
2.3.2 Extension Connection and "Pin Number Chart for the KX-TD174" on Page
83.
• For fixing the connector, see "Amphenol 57JE Type (screw-attach-type 50-pin
connector) Connection" on Page 81.
7. Tie all of the cords into a bundle. If other cords are exposed in the upper cabinets, tie them
also.
8. Close the cabinet cover and secure the outside screw.
9. Cover the cords with the cord holder (included).
10.Fix the cords to the wall as shown so that the front cover can be opened.
D1232
DIGITAL SUPER HYBRID SYSTEM
Panasonic
Cord holder
D1232
DIGITAL SUPER HYBRID SYSTEM
Panasonic