Filter
Top Products
5.2 Wireless System Installation
DECT Installation
165
5.2.4 Selecting the Display Language
The default setting of the PS displaying language is "AUTO (English)". If Spanish display is
required, follow the procedure below.
1. Press (Function).
Display: KEY
2. Press (Book) 2 times.
• You can also search by pressing (Next) or (Previous).
Display: PROGRAMMING
3. Press (OK).
Display: PS-PROGRAM
4. Press (OK).
Display: BACKLIGHT
= ON
5. Press (Next) or (Previous) repeatedly until the display for the Language
Selection appears.
Display: LANGUAGE
= AUTO
6. Press (Book) until the desired selection is displayed.
• You can also search by pressing (Next) or (Previous).
Display example: LANGUAGE
= SPANISH
7. Press (OK).
Display example: BLOQ AGENDA
= NO
8. To exit the PS Programming mode, press (Cancel).
Note
• Moreover, you can select French, Italian, Dutch or German display.
• If you are going to assign the PS to the Digital Super Hybrid System while the default
setting is still "AUTO", the displaying language will depend on the setting of the system.
• During the site survey, only English display is supported regardless of the setting.
OK
OK
OK
C