Filter
Top Products
2.9 System Data Clear
General Installation
119
2.9 System Data Clear
2.9.1 System Data Clear
After storing or changing the system programming data, it is possible to clear your
programming data stored in the system, if required. The system will restart with the default
setting.
1. Slide the System Clear Switch to the "CLEAR" position.
2. Press the Reset Button with a pointed tool.
3. Return the System Clear Switch to the "NORMAL" position while the power indicator is
flashing (within approximately 10 seconds).
Notice
After pressing the Reset Button, return the System Clear Switch to the "NORMAL" position
in step 3 while the power indicator is flashing (within approximately 10 seconds). Otherwise,
the system will not clear.