Filter
Top Products
2.3 Connection
52 General Installation
2.3.3 Parallelled Telephone Connection
Any single line telephone can be connected in parallel with a proprietary telephone as follows:
Method 1: Using a Modular T-Adaptor
Note
• The KX-TD1232 is illustrated as the main unit.
• The 6-conductor wiring cord (and the Modular T-Adaptor KX-J36) is required if the
proprietary telephone KX-T7130 is to be used for parallel connection for KX-TD1232.
D1232
DIGITAL SUPER HYBRID SYSTEM
Single Line TelephoneDigital / Analogue
Proprietary Telephone
2-conductor wiring cord
Connect pins
“T” and “R”.
4-conductor wiring cord
For DPT: Connect pins
“D1” and “D2”
only. (
“T” and “R” are not necessary.)
For APT: Connect pins
“T”, “R”, “D1”
and
“D2”.
Modular T-Adaptor
(Panasonic KX-J66 or USOC RJA2X)