Filter
Top Products
5.2 Wireless System Installation
DECT Installation
169
Assigning the Cell Station ID Number to the PS
1. Set the PS Power Switch to ON while pressing (Talk), (Recell) and
at the same time.
Display: FUNCTION<0-4>
2. Press .
Display example: CS NO?(1-8)
3. Enter the Cell Station number.
Display example: CS ID1=
4. Press (Talk).
Display example: CS ID1=
5. Enter the Cell Station ID number.
• To enter letters, press the following buttons.
Display example: CS ID1=
0123456789
6. Press (Talk).
• The assignment is completed.
Display example: CS NO?(1-8)
7. Repeat steps 3 through 6 to assign other Cell Station ID numbers.
8. Press (Transfer) to return to the initial display.
Display: FUNCTION<0-4>
ABC
A (Hold)
B (OK)
C (Book)
OK
D (Function)
E (Redial)
(Recall)
F
CLR