Filter
Top Products
2.4 Installation of Optional Cards and Unit
102 General Installation
Inserting the Connector
1. Insert the two 50-pin connectors to the jacks as shown below.
The connector "TO SYSTEM" should be connected to the cable which is connected to the
KX-TD816/KX-TD1232.
Also, the connector "TO EXTN" should be connected to the cable which is connected to the
extensions.
2. Insert the cables through the binders.
25
50
1
26
Connector type
50-pin (Amphenol 57JE
series or the equivalent)
Connector
(
TO SYSTEM
)
Connector
(
TO EXTN
)
To ExtensionsTo System
Binders