Filter
Top Products
2.7 Starting the System for the First Time
General Installation
117
KX-TD1232
Notice
• After pressing the Reset Button, slide the System Clear Switch to the "NORMAL" position
at step 6 while the power indicator is flashing (within approximately 10 seconds).
Otherwise, the system will not start up with the default values.
CAUTION
Once you start up the system and you turn the power off, do not perform the above procedure
to start the system again. Otherwise, your programmed data will be cleared. To start the
system, just turn the Power Switch on.
The power outlet should be located near this equipment and easily accessible.
SYSTEM
CLEAR
CLEAR
NORMAL
RESET
Power Indicator
System Clear
Switch
Reset Button
To AC Outlet
Power
Switch