Filter
Top Products
2.4 Installation of Optional Cards and Unit
General Installation
77
2.4.5 Installing Expansion Unit
The following procedures can be used to install the optional expansion units.
The following steps 1 through 5 and 7 through 10 are the same for all expansion units. Step 6
is different for each unit.
The KX-TD1232 is illustrated as the main unit.
1. Loosen the two screws on the cover plate. Insert fingers into the slits to remove the cover
plate.
Note
Any of the cover plates can be removed, as needed.
2. Connect the cabinet cord to the connector in the main unit firmly.
Slit
Slit
D1232
DIGITAL SUPER HYBRID SYSTEM
Panasonic
Panasonic
D1232
DIGITAL SUPER HYBRID SYSTEM