Filter
Top Products
2.2 Installation of the Main Unit
40 General Installation
Mounting on Concrete or Mortar Wall
1. Place the template (included) on the wall to mark the screw positions.
2. Drill holes and drive the anchor plugs (included) with a hammer, flush to the wall.
3. Install the screws (included) into the anchor plugs.
4. Hook the main unit on the screw heads.
Template
Template
KX-TD816 KX-TD1232
Concrete Wall
To the wall surface
Anchor Plug
29 mm
6.4 mm
Drive the screw
to this position
KX-TD816 KX-TD1232