Filter
Top Products
2.4 Installation of Optional Cards and Unit
110 General Installation
2. Insert the plug of the battery adaptor into the battery adaptor connector on the main unit.
Connect the ground wire to the ground terminal on the main unit.
3. Turn on the power switch of the battery adaptor.
Wall Mounting
1. Drive the four small accessory screws into the bottom of the unit.
2. Place the metal plates so that the screw heads insert into the slots as shown.
3. Slide the metal plates in the direction of the arrows, and drive the screws.
4. Place the template on the wall to mark two screw positions, and install the big screws into
the wall.
To ground
Panasonic
D816
DIGITAL SUPER HYBRID SYSTEM
Panasonic
To ground
D1232
DIGITAL SUPER HYBRID SYSTEM
KX-TD816
KX-TD1232
Plug
Plug
Ground Wire
Ground Wire
LED
LED
Power Switch
Power Switch
Ground Terminal
Ground Terminal