Filter
Top Products
5.2 Wireless System Installation
162 DECT Installation
7. Wired Extension Connection (KX-TD144 only)
A Cell Station Interface Unit can support four wired extensions as well as wireless
extensions. Use 4-pin plugs to connect the wired extensions.
a) Insert the required telephone wires into the holes in the plug. Press the transparent part
into the black part.
Note
Do not peel off the wire coating. Insert the wires all the way.
b) Insert the plug into a jack on the unit.
Note
Actual jack numbers for the KX-TD1232 depend on the type and location of units
connected to the system.
8. Tie all of the cords into a bundle. If other cords are exposed in the upper cabinet, tie them
also.
9. Close the cabinet cover and secure the outside screw.
D1
T
R
D2
D1
T
R
D2
1
2
4-pin plug
Panasonic
12
11
10
9
Jack
no.
<KX-TD816>
D1
T
R
D2
20
19
18
17
Jack
no.
<KX-TD1232>
D1
T
R
D2
CS INF
DECT
Connect the ground terminal to ground.
Note: If other expansion units are
installed, the frame ground connection
is required for only one unit.
To extensions