Panasonic KX-TD816 Telephone User Manual


 
5.2 Wireless System Installation
DECT Installation
161
c) Insert the modular plug into the Cell Station, and attach the ferrite core (included) to the
plug cord.
d) Survey the site for the Cell Station by testing the radio signal. Refer to the Section
5.2.5 Site Survey.
Note
System Programming is required to assign an extension number to each portable
station. <SYS PRG [650], [671]>
For the KX-TD146, an AC adapter (KX-A277) is necessary.
The same AC outlet should be used for the main PBX unit and a Cell Station
Interface Unit.
15 cm
Ferrite Core
Roll the cord once
around the ferrite core
and close the core.
Panasonic
CS INF
DIGITAL SUPER HYBRID SYSTEM
6CS
Wrap the cord once around
the upper hook and pass
through the lower hook.