Filter
Top Products
5.2 Wireless System Installation
170 DECT Installation
Unplugging the Cable from the Cell Station
After assigning the Cell Station ID number to the PS, unplug the cable from the Cell Station
once.
DIP-Switch Setting
After unplugging the Cell Station once, set the DIP-Switch as follows.
1. Switch the Radio Signal Test Switch from OFF to ON.
2. Set the Channel Number Switches as desired.
Channel 1
1234
Channel 4
1234
Channel 7
1234
Channel 2
1234
Channel 5
1234
Channel 8
1234
Channel 3
1234
Channel 6
1234
Channel 9
1234
DIP-Switch
10
10
10
10
10
10
ON
123456
OFF
Radio Signal
Test Switch
Channel Number Switch
(Default: Channel 0)