Filter
Top Products
Using a Cellular Phone with this Unit
For assistance, please visit http://www.panasonic.com/phonehelp 91
Ringer tone
You can change the ringer tone heard
when a cellular call is received. You can
change it for the handset and base unit
individually.
1 {MENU} (F2) i s i {SELECT}
2 “Ringer for cell” i {SELECT}
3 “Ringer tone” i {SELECT}
4 Select the desired item. (Default: “Tone
3”) i {SAVE} i {OFF}
Note:
L If you erase a customized ring for
cellular call, “Tone 3” (default) is used
instead of that ringer tone.
1 {CELLULAR}
2 “Cellular setting” i {SET}
3 “Ringer tone” i {SET}
4 Select the desired item. (Default: “Tone
3”) i {SET} i {STOP}
Selecting which unit to ring o
You can select which handset or base unit
rings when you receive a call from one of
the registered cellular phones.
1 {CELLULAR}
2 “Cellular setting” i {SET}
3 “Assign Base/HS” i {SET}
4 Select the desired cellular phone. i
{SET}
5 Select the desired unit, then press {>}.
(Default: “All”)
L The selected units are indicated by
“Q”.
L To cancel a selected unit, press {>}
again.
6 {SET} i {STOP}
Answering system settings for
cellular calls o
Setting the answering system for a
cellular call
This feature allows the base unit to answer
cellular calls when you are not available to
answer cellular calls.
Important:
L To use this feature, you need to turn on
the answering system for line 1 and/or
line 2 (page 79).
L If this feature is turned on, the base unit
plays the greeting message for line 1
and message is recorded on line 1.
1 {CELLULAR}
2 “Cellular setting” i {SET}
3 “TAD (cell)” i {SET}
4 Select the desired setting. (Default:
“Off”) i {SET} i {STOP}
Note:
L “TAD” stands for Telephone Answering
Device.
Ring count
You can change the number of times the
cellular phone rings before the base unit
answers cellular calls.
1 {CELLULAR}
2 “Cellular setting” i {SET}
3 “TAD ring count” i {SET}
4 Select the desired number. (Default:
“4”) i {SET} i {STOP}
Handset
Base unit