Filter
Top Products
F
Monitoring
For assistance, please visit http://www.panasonic.com/phonehelp 63
1 Access the cordless camera (page 57).
2 Click [Setup] tab at the top of the page.
3 Click [Sensor Options].
4 Select the desired setting for “Audio
Sensor Sensitivity” (Default:
“Normal”), then click [Save].
Selecting the method of saving the
cordless camera images
This setting determines what happens
when the cordless camera’s memory
becomes full.
–“Overwrite image” (Default): The
cordless camera replaces the oldest
image with a new image in its memory.
–“No overwrite”: New images are not
saved.
L After saving the desired images into
your handset or your computer, you can
erase all other images (page 56, 59).
1 Start monitoring (page 54). i
{MENU}
2 “Camera setting” i {SELECT}
3 “Sensor options” i {SELECT}
4 “Memory full” i {SELECT}
5 Select the desired setting. (Default:
“Overwrite image”) i {SAVE}
i {OFF}
1 Access the cordless camera (page 57).
2 Click [Setup] tab at the top of the page.
3 Click [Sensor Options].
4 Select the desired setting for “Memory
Full” (Default: “Overwrite Image”),
then click [Save].
Adjusting the cordless camera speaker
volume
1 Start monitoring (page 54). i
{MENU}
2 “Camera setting” i {SELECT}
3 “Speaker volume” i {SELECT}
4 Select the desired volume. (Default:
“6”) i {SAVE} i {OFF}
Setting the cordless camera tone
You can select the camera tone that is
heard from the cordless camera:
– when the cordless camera detects
motion and/or sound.
– when {Call button} of the cordless
camera is pressed.
1 Start monitoring (page 54). i
{MENU}
2 “Camera setting” i {SELECT}
3 “Camera tone” i {SELECT}
4 Select the desired setting. (Default:
“Tone 1”) i {SAVE} i {OFF}
1 Access the cordless camera (page 57).
2 Click [Setup] tab at the top of the page.
3 Click [Sensor Options].
4 Select the desired setting for “Tone
Pattern” (Default: “Tone 1”), then
click [Save].
Your computer
Handset
Your computer
Handset
Handset
Your computer