Filter
Top Products
d
Phonebook
For assistance, please visit http://www.panasonic.com/phonehelp 37
To change the picture ID
Select the desired item. i {SELECT}
i Select the desired picture ID. i
{OK}
To turn the picture ID off
“Off” i {OK}
4 {SAVE} i {OFF}
Erasing items in the handset
phonebook
Y
1 Find the desired item (page 36).
2 {CLEAR} i {YES} i {OFF}
Chain dial Y
This feature allows you to dial phone
numbers in the handset phonebook while
you are on a call. This feature can be used,
for example, to dial a calling card access
number or bank account PIN that you have
stored in the handset phonebook, without
having to dial manually.
1 During an outside call, press {MENU}.
2 “Phonebook” i {SELECT}
3 Find the desired item (page 36). i
{CALL}
Note:
L When storing a calling card access
number and your PIN in the phonebook
as one phonebook item, press {PAUSE}
to add pauses after the number and PIN
as necessary (page 30).
L If you have rotary or pulse service, you
need to press {*} before pressing
{MENU} in step 1 to change the dialing
mode temporarily to tone.
Copying handset phonebook
items
Y
You can copy one or all of the phonebook
items from the handset to the phonebook
of the base unit or a compatible Panasonic
unit (KX-THA11/KX-THA12/KX-THA16/
KX-THA17).
Important:
L The picture ID setting for phonebook
items is not copied.
L In order to correctly copy a ringer ID as a
phonebook item, the same melodies
must be stored in identical order in the
memories of both units involved. If the
melody order in memory is different in
the copy destination unit from the
sending unit, the ringer ID will not be
copied properly. (This is not necessary if
the ringer ID is set to use a preset
melody.)
L The melodies and songs for ringer ID
are not copied to the base unit.
Copying an item
1 {MENU} (F2) i q i {SELECT}
2 {COPY}
3 “Copy 1 item” i {SELECT}
4 Select the destination unit. i
{SELECT}
5 Find the desired item (page 36). i
{SEND}
6 Press {OFF} after “Complete” is
displayed.
Copying all items
1 {MENU} (F2) i q i {SELECT}
2 {COPY}
3 “Copy all items” i {SELECT}
4 Select the destination unit. i {SEND}
5 Press {OFF} after “Complete” is
displayed.