Filter
Top Products
Programmable Settings
For assistance, please visit http://www.panasonic.com/phonehelp 75
Note:
L You can select a line manually
regardless of the line selection mode by
pressing {LINE1} or {LINE2}.
Flash time
The flash time depends on your telephone
exchange or host PBX.
L You only need to program this setting
once, using either the handset or base
unit.
Important:
L The setting should stay at 700 ms unless
pressing {FLASH} fails to pick up the
Call Waiting call.
1 {MENU} (F2) i x i {SELECT}
2 “Set tel line” i {SELECT}
3 “Set flash time” i {SELECT}
4 Select the desired line.
5 Select the desired setting. (Default:
“700ms”) i {SAVE} i {OFF}
1 {MENU} i h i {SET}
2 “Set tel line” i {SET}
3 “Set flash time” i {SET}
4 Select the desired line.
5 Select the desired setting. (Default:
“700ms”) i {SET} i {STOP}
Note for handset and base unit:
L If the unit is connected via a PBX, certain
PBX functions (call transferring, etc.)
may not work correctly. Consult your
PBX supplier for the correct setting.
Line mode
Generally, the line mode setting should not
be adjusted.
When another phone connected to the
same line is in use, and
–if k or l is not displayed on the
handset, or
–if {LINE1} or {LINE2} button light is off
on the base unit,
you need to change the line mode to “A”.
L You only need to program this setting
once, using either the handset or base
unit.
1 {MENU} (F2) i x i {SELECT}
2 “Set tel line” i {SELECT}
3 “Set line mode” i {SELECT}
4 Select the desired line.
5 Select the desired setting. (Default: “B”)
i {SAVE} i {OFF}
1 {MENU} i h i {SET}
2 “Set tel line” i {SET}
3 “Set line mode” i {SET}
4 Select the desired line.
5 Select the desired setting. (Default: “B”)
i {SET} i {STOP}
Handset
Base unit
Handset
Base unit